Prominent & Leading Manufacturer from Gurgaon, we offer tetso digital vacuum gauge with bluetooth part code 552, omni digital vacuum gauge 1/4, brute ii 4-valve manifolds, titan 2-valve test and charging manifold, nh3 ammonia manifold and single manifold gauge.
TETSO Digital Vacuum Gauge with Bluetooth Part code 552
2 x 1/4" SAE (7/16" UNF) 1 x mini - DIN (connection to testo 570)
1 micron (0 to 1000 microns) 10 microns (1000 to 2000 microns) 100 microns (2000 to 5000 micron)
absolute: 6 bar / 87 psi relative: 5 bar / 72 psi
Accuracy vacuum +-1 digit (at +22 DegreeC)
+-10 microns + 10 % of m.v. (100 to 1 000 microns)
-20 to +50 DegreeC
-10 to +50 DegreeC
160 x 110 x 50 mm
Approx. 500 g
2 AA batteries
50 hrs (without Bluetooth/backlighting)
Measurement value sensor
mmHg, Torr, mbar, hPa, micron, inH20, inHg, Pa
Compatability App connection
requires iOS 11.0 or newer / Android 6.0 or newer, requires mobile end device with Bluetooth 4.0
1-Highly accurate and reliable measurement results. 2-Measurement data monitoring via testo Smart App. 3-Measurement data dispatch via testo Smart App. 4-Measurement of the evaporation temperature of H2O. 5-Optical alarm when a limit value is exceeded. 6-Extremely robust and water/dirt resistant (IP 42). 7-Can be used for applications with A2L refrigerant, taking into account the relevant legislation, norms and guidelines for refrigeration systems.
Delivery Time: 6-8 week
Packaging Details: testo 552 is a digital vacuum gauge for the evacuation of
refrigeration systems and heat pumps. It measures even the
smallest absolute pressures, and delivers highly accurate
information about a system's status of dehumidification
(removal of foreign matter, incl. oils, foreign gases, etc.).
Via a Bluetooth interface, the testo 552 connects with the
testo Smart App on your smartphone or tablet. This allows
you to monitor the absolute pressure reached during the
evacuation conveniently and wirelessly. In addition to this,
the measurement results can be quickly documented in the
App and sent by e-mail.
Its robust construction makes it ideal for everyday use,
protected against dirt and water.
Rich and intuitive interface - turn it onand it's ready to use with the defaultsettings.• The easy-to-clean vacuum sensormeasures 450 psi overpressure andreads several vacuum units (microns,millibar, torr and pascal).• An audible and visual signal when thedesired vacuum level is reached.• Electronic paper display for clear View -even in direct sunlight.• 45 ° bend for attachment (1/4 inch or5/16 inch)• Low battery indicator and automatic inactivity shutdown.
Comes with the same features and benefits as the TITAN™ 4-valve unit but without the fourth hose. All fittings 1/4" unless otherwise noted.•Exclusive in-line mesh filters of size 100 on all flare connections keep out particulate material and extend the life of the seats.•Sight glass for easy view of refrigerant flow and condition during charging and recovery•Made in the USANH3
Cast iron body and metal handles with full size•Dual temperature/pressure gauge R717 with bar with °C and °F bar/psi ammonia scales •Finger-tight one-piece valve stem for positive seal on nylon seat Use only with NH3 rated hoses Made in the USA
Manifolds and hoses specifically for transcritical CO2 applications (R-744).•The Transcritical CO2 Inspection and Filling Fixture is constructed with a forged aluminum alloy housing, which makes it lightweight and easy to handle.•Fourth hose enables connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump for diagnostics, evacuation and charging without switching hoses•3/8“ vacuum connection for using a larger hose to cut evacuation time by up to 33% (all other ports are 1/4 inch)•No sight glass means extra security. With genuine 45° SAE torch hoses, 78 inches (200 cm) long.
The YELLOW JACKET® Heat Pump Manifold features two 800 psi gauges to read all heat pump pressure conditions. Traditional low side manifold gauges can be susceptible to damage when heat pumps go into heating mode. Because the low side gauge of the YELLOW JACKET Heat Pump Manifold is also designed for pressures up to 800 psi, it can read the pressure whether the pump is in heating mode, cooling mode or transition.
Large 3-1/8” gauges feature black steel cases with polycarbonate crystal
High- and low-side gauges read up to 800 psi
Larger dials are bold and easy to read
Dials with 1% accuracy (Class 1) full scale movement provide the level of accuracy necessary for critical charge systems